Educational Articles » lowrance sonar settings

Airmar TM150 setup Posted on May 28, 2018

If you use the Airmar TM 150 on a Lowrance I have found the Custom setting of single frequency 105 kHz gives me the best results. However you need to turn off the noise rejection to get those results.

The left side of this image has the default setting of Noise Rejection set at low and the right side is the Noise Rejection turned off. I don't know why this transducer doesn't perform well with the Noise Rejection on.

Lowrance TM 150 settings

Lowrance Elite 4 and 5 (not Elite DSI or HDI) Sonar Settings Posted on November 02, 2013

Learn about freshwater recommended settings for Elite 4 and 5 (not Elite DSI or HDI) lowrance scanner.


Read More >>

Lowrance Elite 4 and 5 DSI Sonar Settings Posted on October 31, 2013

Learn about freshwater settings for Elite 4 and 5 DSI lowrance scanner.


Read More >>

Lowrance Mark 4 and 5 Sonar Settings Posted on October 30, 2013

Learn about freshwater sonar settings for the Mark 4 and 5 lowrance scanner. 


Read More >>

Lowrance HDS Gen 1 and 2 Keypad Models 5, 7, 8, and 10 Sonar Settings Posted on October 30, 2013

Learn about recommended freshwater settings for HDS Gen 1 and 2 Keypad models 5, 7, 8 and 10.


Read More >>

Lowrance HDS Touch Model 7, 9 and 12 Sonar Settings Posted on October 24, 2013

Learn about recommended freshwater settings for HDS Touch Modes 7, 9 and 12.


Read More >>

Lowrance Elite 5 and 7 HDI Sonar Settings Posted on October 23, 2013

Learn about the settings for the Elite 5 and 7 HDI.


Read More >>

Google Earth and Lowrance Waypoints Posted on May 08, 2013

You view your Lowrance waypoints on Google Earth. Google Earth has satellite images of Earth that you can zoom in and see lakes and rivers. This is another way to view where you placed your waypoints on a different map than on your Lowrance GPS map.

Some images can show weed lines and shallow rocks. By placing waypoints on Google Earth can mark fishing spots for future use.


Read More >>